Radio Communications

The first wireless transmitters went on the air in the early 20th century using radiotelegraphy (Morse code). Later, as modulation made it possible to transmit voices and music via wireless, the medium came to be called "radio."
Current deployments are mainly for:

Trunk Radio
Mainly used as a common mobile radio communications infrastructure. This infrastructure is targeted primarily at the mobile radio needs of public safety groups (such as police and fire departments), utility companies, and other enterprises that provide voice and data communications services.

UHF/VHF Repeaters
In a wireless communications system, a repeater consists of a radio receiver, an amplifier, a transmitter, an isolator, and two antennas. The transmitter produces a signal on a frequency that differs from the received signal. This so-called frequency offset is necessary to prevent the strong transmitted signal from disabling the receiver. The isolator provides additional protection in this respect. A repeater, when strategically located on top of a high building or a mountain, can greatly enhance the performance of a wireless network by allowing communications over distances much greater than would be possible without it.

Communication Sites Rental
We’ve also built communication sites in designated areas complete with all the necessary equipment and facilities for clients who are unable to build sites on their own due to budget constraints. Areas where there are currently no sites can be considered for future development depending on feasibility of future projects

Radio Equipment Rental
A host of radio communication equipment and accessories are available to our customers needing equipment on a seasonal basis. By allowing them to rent instead of buying equipment, they are able to focus most of their operating budgets on more important expenditures thus Silicon is able to help them solve cash flow problems.